Home | Forums | Couchbase | Couchbase Server 2.0

Directions for reconfiguring couchbase network ports

2 replies [Last post]
Thu, 01/03/2013 - 19:39
charlez
Offline
Joined: 01/03/2013
Groups: None

The Couchbase 2.0 Manual section 2.1.5 Network Ports (RE: http://www.couchbase.com/docs/couchbase-manual-2.0/couchbase-network-por...) shows a list of network ports for a default Couchbase installation. I searched but could not find directions for how to modify/reconfigure the default Couchbase configuration for all of the aforementioned ports (to accommodate a network sysadmin policy). It'll be greatly appreciated if you can post such directions, thanks.

Top
Fri, 01/04/2013 - 02:33
tgrall
Offline
Joined: 09/05/2012
Groups: None

Hello Charlez,

You can change the Administration port, defaulted to 8091, using the CLI interface, for example:

 ./couchbase-cli cluster-init -c localhost:8091 -u Administrator -p password --cluster-init-port=9090

You can also change the port of your bucket

You can find all the commands and parameters in the chapter 'couchbase-cli Tool':
http://www.couchbase.com/docs/couchbase-manual-2.0/couchbase-admin-cmdli...

Can you tell me which other ports you would like to change ?

Regards
Tug

__________________

Tug
@tgrall

Top
Fri, 01/04/2013 - 14:18
charlez
Offline
Joined: 01/03/2013
Groups: None

Thanks Tug,

I've changed the web admin port via the manner as shown in your follow-up post (actually I had done that before, but access problems persisted because the network sysadmin had given me an incorrect open port list!) . For now I'm good to go, and hopefully won't require additional port adjustments.

Charlez

Top